Proton VPN
159 results found
-
Please support hiding location for F1TV, it used to work, however they seem to have clamped down.
Please support hiding location for F1TV, it used to work, however they seem to have clamped down.
2 votes -
Add more servers in Brazil
Brazil has been facing some political problems because the president and the highest authorities of the Brazilian justice (STF) have an alignment of ideas with communism and dictators, it is essential that Proton seeks ways to circumvent future barriers in Brazil because they want to censor the internet and social networks, telegram for example has been experiencing problems with some frequency in brazil, and in addition brazil is a continental country, the current servers are all located in São Paulo, I suggest that they add more servers distributed in the main capitals of the country to improve connection speed (Rio…
1 vote -
Additional Options for ProtonVPN Profiles
In ProtonVPN Profiles, I would like options for Kill Switch and Netshield, so those settings can be set independently for my various profiles.
4 votes -
Add criteria options for Quick Connect
The "Quick Connect" button connects to the fastest available server; however, not all servers are made equal. If I want to connect to the fastest server that supports streaming, P2P, or Tor (or some combination thereof), then I have to go to the server list and manually compare available servers, then pick the one that is best. This is especially concerning with P2P, since even different servers in the same region don't consistently support it, and there's no easy way to see the supported features of the server you're connected to without finding it in the server list.
It would…
4 votes -
Make systemd dependency optional
ProtonVPN NetworkManager Library has a hard dependency on systemd-python [https://github.com/ProtonVPN/protonvpn-nm-lib/issues/18].
I'm upgrading ProtonVPN-CLI and packaging ProtonVPN-GUI in GNU Guix [https://issues.guix.gnu.org/59246], which doesn't have/use systemd.
Could you please make the systemd optional or make seatd [https://git.sr.ht/~kennylevinsen/seatd] an alternative option?
5 votes -
Automatically changing VPN connections every X minutes
Add a Textbox under profiles where one can enter the amount of minutes after which the VPN connects to another server
17 votes -
Profiles: Allow selecting multiple servers
It would be nice to change profiles to add a checkbox beside the servers in the list so we can select multiple servers to put in the profile and leave out others.
Ex. I would like only Toronto Ontario servers nothing else in one profile.
Thanks
10 votes -
Display the forwarded port number in the quick menu of ProtonVPN in the icon tray
Display the forwarded port number in the quick menu of ProtonVPN in the icon tray.
Currently, there is only the server name and IP address displayed. Please add the forwarded port number too.
12 votes -
افزایش تعداد سرورهای رایگان
در کشوری مثل ایران که همه چیز فیلتره و امکان پرداخت هم به خاطرتحریم برای
میسر نیست ازتون خواهش میکنم با اضافه کردن تعداد سرورهای رایگان به ماکمک کنید مردم3 votes -
سلام دوستان . پروتون را نمی توانم در لپ تاپ باز کنم . شاید بدلیل اینترنت بسیار ضیعیف ایران است .
پروتون روی گوشی بخوبی کار مینکند اگرچه بسختی . اما علیرغم طی کردن موارد خواسته شده نرم افزار و تائید آن . ولی در لپ تاپ باز نمیشود . تشکر میکنم از گروه شما . ما در ایران امکان خرید نداریم . اینجا همچی سانسور است . مثل برزخ شده ! بمردم ایران کمک کنید تا با امنیت به اخبار دسترسی داشته باشند .
4 votes -
ProtonVPN: better support for arm linux (Raspberry Pi, PinePhone, etc)
ProtonVPN gui and cli can be installed on various operating systems running on different arm devices. It seems that Debian-based OSes like Raspberry Pi OS and Mobian cannot properly use either tool. The connection fails and ultimately you are unable to access the internet. In order to correct this you need to run:
sudo nmcli connection delete pvpn-ipv6leak-protection
as suggested here: https://askubuntu.com/questions/1319033/internet-stops-working-after-installing-protonvpn.
It would be nice to see more devices/oses supported. Until then when the connection fails at least it should clear any connection leftovers automatically.
11 votes -
Bind the Kill Switch to specific programs
Bind the Kill Switch setting to specific programs. For instance: Application "X" will terminate if VPN connection drops, even when switching servers.
11 votes -
Folder selection for Split Tunneling
Easily exclude all sub-executables of a service by selecting a whole folder instead of having to manually select every file by hand.
As an example, Steam needs much more than just the main executable and the game's executable to work properly with Split Tunneling.
6 votes -
Porn/adult sites blocker for NetShield
Warp (CloudFlare) has a feature for their equivalent of NetShield that also blocks porn/adult sites from the DNS, in addition to options for malware and ads. Consider adding this for a family-friendly setting?
19 votes -
Show current connected profile label in the GUI
When connected to a profile, the Windows GUI shows:
Country >> Server
IP Load
Protocol SpeedsIt would be nice to see current profile name there as well. And also the profile may be highlighted in the list to indicate that it is currently connected. Without this feature it is hard to tell at a glance which profile is being used at the moment. So the user either has to memorize all the servers, or always reconnect to the needed profile to ensure it is being used.
4 votes -
Improved server search and profile creation.
Provide the ability to search for servers and create profiles using filters based not only on country but things like city, state, type of server (e.g., basic, P2P), load, latency, etc.
22 votes -
Include Domain Names in Split Tunneling Exclude list
Currently, adding a website to the exclude list requires that I first must find out the IPv4 numerical address, which is not easy to do for a lot of people. I eventually found: https://dns-lookup.com
It would be nice if the exclude list could accept names instead of numbers, it would only require using your own DNS server to return the numerical address to the app as an appended tag for the exclude entry - so the app would still work pretty much the same as before
11 votes -
Change iOS app icon color to indicate connection status (or as notification)
I'm relatively new to iOS, so I might be missing something, but it would be nice if the ProtonVPN connection status was shown as a badge on the app icon. I think what a user can see on the status bar is different depending on the version of iOS and model of phone and, in my case, the VPN status is not shown (which is different from the Android device I used to have).
I sometimes find that the VPN is not connected (and not trying to re-connect) even though "Always-on VPN) is selected in the app settings and it…
7 votes -
0 votes
- Don't see your idea?