1172 results found

1. pass-cli

   Hello I just downloaded pass-cli on the beta channel using the curl command provided at https://protonpass.github.io/pass-cli/get-started/installation/
   To be honest I don't have any particular NEED for accessing the cli tool, but figured I would install it because who knows, maybe i'd find some use for it.

   Instantly I was met with an issue that frankly I find unacceptable from a company the size of proton... You release a brand new cli tool, and don't include a manpage... I get that the documentation is available online, and pass-cli help/ --help provide a tiny bit of assistance, but come on. I feel like the creation of a manpage has to be the easiest thing possible when it comes to developing any cli tool, and if you can't do that we're supposed to somehow trust you with the most sensitive/ valuable information on the face of this earth?

   at first I was going to complain about the fact you don't provide command completion. Because typically upon installing a new cli tool the very first thing is "command" <space> <tab> followed by "command" <space> "-" <tab> So I can get an idea of what sub commands/ options are available to me. Not all tools provide completion though, and I reluctantly accept that fact when faced with it. However after that test failed, and I went to open the man page just to be greeted by "No manual entry for pass-cli" I was genuinely turned off.

   This means that every time I want to do something I'd have --help multiple times until I figure out what my final command needs to be, and even still that's not always enough e.g.:
   1. pass-cli --help
   2. pass ssh-agent --help
   3. pass ssh-agent load --help

   to finally get:
   Load SSH keys from Proton Pass into the system SSH agent

   Usage: pass-cli ssh-agent load [OPTIONS]

   Options:
   --share-id <SHARE_ID> Share ID of the vault to load keys from
   --vault-name <VAULT_NAME> Name of the vault to load keys from
   -h, --help Print help

   So I try:
   pass-cli ssh-agent load --vault-name Notes --help

   Which gives me the same help prompt as above, so I just try:
   pass-cli ssh-agent load --vault-name Notes

   And I am met with:
   Error: Failed to load SSH keys from vaults

   Caused by:
   0: Failed to load SSH keys from vaults
   1: Error finding vault
   2: Could not find vault Notes

   No I do not have any ssh keys in that vault, but what if I had multiple. What do I do? Theres no tab completion to give me a hint at the next input, no man page to load up to definitively answer that question. Luckily I still had https://protonpass.github.io/pass-cli/get-started/installation/ open in my browser so I didn't have to twiddle around for too long just to find out you can only import all ssh keys within a vault in one go instead of individual ones, but that shouldn't be the case. And if your tool requires that the user reference a document webpage in order to use it, you absolutely should have a way for the user to easily pull up said webpage whenever they need it i.e. linking it in the man page that doesn't exist.

   EDIT:
   As if that wasn't enough I decided to remove the tool until until it has gone through it's teething process a bit, and shocker (sarcasm. I'm not at all shocked at this point) theres no uninstall instructions. I'm afraid to even "rm -rf ~/.local/bin/pass-cli" at this point even though I believe (hope) that is the only thing the curl command installed on my system because I wouldn't be surprised if doing so would leave behind some orphan files. Whereas leaving it installed until an update adds an uninstall command or more documentation is created explaining how to properly uninstall the tool. Come on proton. At this point I've been a Proton Unlimited subscriber for over 2 years meaning I personally have contributed over $300 of my hard earned money to the company. I expect better from you.

   Hello I just downloaded pass-cli on the beta channel using the curl command provided at https://protonpass.github.io/pass-cli/get-started/installation/
   To be honest I don't have any particular NEED for accessing the cli tool, but figured I would install it because who knows, maybe i'd find some use for it.

   Instantly I was met with an issue that frankly I find unacceptable from a company the size of proton... You release a brand new cli tool, and don't include a manpage... I get that the documentation is available online, and pass-cli help/ --help provide a tiny bit of assistance, but come on. I feel… more

   3 votes

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  Changes to existing features  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

2. Compatible with Vivaldi

   Import passwords from Vivaldi, as well as other browsers such as Zen, Arc,...

   8 votes

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   1 comment  ·  New feature  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

3. Button to restore the "Current Site" search filter in the extension

   When opening the extension on a specific website, Proton Pass correctly filters the login list based on the current URL. However, if I clear this filter to search for a different item manually, there is no quick way to go back to the "Current Site" view without manually re-typing the domain or refreshing the tab.

   Suggestion: Please implement a "Reset" or "Current Site" button next to the search bar. This feature would allow users to instantly clear their manual search queries and restore the automatic filter based on the active browser tab URL.

   3 votes

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  New feature  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

4. Proton Pass iOS Mobile - Create email alias (hide my email) on the fly in browser

   It's super cumbersome right now to create a "hide my email" alias on iOS mobile in the browser. I wish it was possible to create one on the fly.

   For instance, in iOS, when filling out email on a sign-up form, I get iOS's default iCloud "Hide My Email" option to create an alias on the fly. No ProtonPass option.

   To create a "hide my email" in ProtonPass currently, it's a long multistep process. Long press the input and choose Autofill > Passwords... which opens ProtonPass. Create an entire new login manually in the app, generate the alias, then save it, then return to the form to fill it. It's not a smooth process. Sometimes this process breaks and I'll get kicked out of ProtonPass if I came from Autofill > Passwords...

   It's super cumbersome right now to create a "hide my email" alias on iOS mobile in the browser. I wish it was possible to create one on the fly.

   For instance, in iOS, when filling out email on a sign-up form, I get iOS's default iCloud "Hide My Email" option to create an alias on the fly. No ProtonPass option.

   To create a "hide my email" in ProtonPass currently, it's a long multistep process. Long press the input and choose Autofill > Passwords... which opens ProtonPass. Create an entire new login manually in the app, generate the alias, then save… more

   2 votes

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  Changes to existing features  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

5. Add the ability to change a password inline on the autofill window.

   When you log into a website sometime the password is expired and needs changed. I would like the ability to change the password inline with the autofill window. The current method is to minimize the web browser, open the password, app, changed the password, copy the password, go back to the web browser (hope it hasn’t timed out), paste the new password. The ability to edit the login within the autofill window to change the password would save a ton of steps. BTW 1Password has this feature.

   2 votes

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  New feature  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

6. Vault name length

   The vault list on the left only shows about 16 letters/characters of the vault-name. If you have multiple vaults with similar name it's difficult to distinguish them.

   A possibility to extend the size of the vault list would be great, or at least that it shows the full vault-name if you hover over it.

   2 votes

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  New feature  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

7. Proton Pass: Have a separate section for vaults that is hidden with a pin.

   A private folder in the vaults list, that has a different pin lock on it. (Would be used for people who share computers.)

   5 votes

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   1 comment  ·  New feature  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

8. Automatic insertion on the Mac using Touch ID
   9 votes

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  New feature  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

9. Apps, web apps, and extensions auto-lock and can be unlocked with a security key

   Similar ideas have already been suggested, but this idea is to combine those and add the use of a security key across all apps - with Proton Pass being highest priority. Namely:

   -Proton Pass (in all forms) should have configurable auto-lock timers and options for auto-lock on browser closure, app closure, computer sleep, lock, logoff, shutdown, etc
   -all Proton products (in all forms) should have the above
   -locked products should be unlockable with a security key (with Proton Pass as priority), but should not require password AND security key to unlock

   I want all Proton products to have the auto-lock option (but configurable as above) that Proton Pass currently has, but with the choice to use a security key instead of a PIN or the overall Proton Account password.

   I want to be able to log in to Proton products on a device, using normal two-factor authentication (password and security key), leave my security key in the USB slot (or have it at hand to wave for NFC), have the Proton products lock in a configurable manner, and be able to unlock them by touching the security key (waving for NFC) when prompted if I return to the product after the product has locked.

   That way, when I am done with the device, I take my security key with me, and if anyone gets a hold of my device they cannot access any part of my Proton Account without the security key, even though the Account is still "logged in" (does not require a password challenge). Currently, even with 2FA enabled and a security key registered, so long as someone can bypass the local account control and unlock the device (which is outside of Proton's control and dependent upon the device manufacturer, etc), they can access all Proton products logged in on that device (except Proton Pass, but that may only be secured by a 6-digit PIN).

   Similar ideas have already been suggested, but this idea is to combine those and add the use of a security key across all apps - with Proton Pass being highest priority. Namely:

   -Proton Pass (in all forms) should have configurable auto-lock timers and options for auto-lock on browser closure, app closure, computer sleep, lock, logoff, shutdown, etc
   -all Proton products (in all forms) should have the above
   -locked products should be unlockable with a security key (with Proton Pass as priority), but should not require password AND security key to unlock

   I want all Proton products to have the auto-lock… more

   5 votes

   Vote Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  New feature  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

10. GitHub Action - Load Secrets from Proton Pass (like 1Password)

    1Password has a github action to load secrets to be used in GitHub actions and it has been super useful. I would love to get such a feature in Proton Pass.

    For reference, this is the action I am referring to: https://github.com/marketplace/actions/load-secrets-from-1password

    4 votes

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  New feature  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

11. sort vault

    Being able to manually drag/drop and change the sorting of the vaults.

    I want to have my personal vault on top and then family, my workplace etc. Currently, have to add numbers to the vault to get it in the desired sorting.

    7 votes

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  New feature  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

12. yubikey permanently on

    Hi, I use the yubikey with my proton pass account and I am happy Proton does support Yubikeys,in general. For an extra layer of security, it woudl be even nicer if it was possible to have the key behaving like it does with the Yubikey authentificator (desktop app) where the app is locked whenever the yubikey is not inserted (anymore) in the computer usb port.

    10 votes

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    2 comments  ·  Changes to existing features  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

13. Password manger for offline devices

    It would be awesome to have an encrypted Folder with indexation for offline devices passwords that we can access offline in our phone to log in into air-gaped devices, or just to store passwords related to other systems/devices where we just need easy search of passwords previously stored. Have a nice day.

    2 votes

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  New feature  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

14. Autofill the new "Other" Item type

    Please add the ability to autofill the new "Other" item type. For example when I want to enter my wifi password on mobile and open Proton Pass from my keyboard, my wifi password doesn't show up as an option (even when I search for it) because it is not a login item, but an "other" item.

    7 votes

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    1 comment  ·  New feature  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

15. Proxy setting for Authenticator

    Please add proxy setting Authenticator, because proton is not accessible in China. I have to use proxy to login Authenticator.

    6 votes

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    1 comment  ·  New feature  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

16. Make emails found in data breaches case insensitive

    If one of your emails has been found in a data breach in Pass Monitor, Proton Pass will currently only show logins where you saved your email in lowercase.

    For example, if I have a login saved as My.Name@example.com, Proton Pass will say "Breaches detected for my.name@example.com" and the "Used in" section will currently be empty because it didn't match My.Name@example.com.

    This is a request to show all matching logins in the "Used in" section regardless of case.

    11 votes

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    1 comment  ·  Changes to existing features  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

17. Monitoring Credit Cards on Dark Web

    Add the monitoring of the, in Proton Pass, stored Credit Cards to the Dark Web Monitoring Feature

    2 votes

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  Changes to existing features  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

18. Add passkey to the desktop apps.

    I'm not typing my 20 character password. Just let me point the camera at the app and login.

    2 votes

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  New feature  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

19. Indicate vault items that support passkeys

    When you add a Passkey to a Password there is no indication of that password having a Passkey whilst out of it. There should be a Category that a user can tap or click to show only a list of passwords that have Passkeys added to them. Lastly a way to find out that a website supports passkeys by url scanning or a offline downloaded database. That way when a user saves a supported site in Proton Pass and doesn’t have a Passkey saved to it. Proton Pass will then let the user know that Passkeys are available on that URL.

    When you add a Passkey to a Password there is no indication of that password having a Passkey whilst out of it. There should be a Category that a user can tap or click to show only a list of passwords that have Passkeys added to them. Lastly a way to find out that a website supports passkeys by url scanning or a offline downloaded database. That way when a user saves a supported site in Proton Pass and doesn’t have a Passkey saved to it. Proton Pass will then let the user know that Passkeys are available on that… more

    218 votes

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    3 comments  ·  New feature  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

20. Display vault name or icon when displaying autofill options

    Display vault name or icon when displaying autofill options. Currently only the entry name and username/email are displayed. If I have two identically named entries for different family members in different vaults, I don't know which is which during autofill.

    Example: the username for login is a member number, which I don't remember by heart, then during autofill I'll see two identically named entries with login numbers, not knowing which is who.

    Having the vault icon/name displayed somewhere as well would immediately tell me which entry I need to select to access that family member's account.

    7 votes

    Vote Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    1 comment  ·  Changes to existing features  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating