Proton VPN
361 results found
-
Please add an option to change graphing from KiloByte/MegaByte to Kilobit/Megabit
I prefer seeing network traffic in bits instead of bytes. That way i dont have to sit there and fiddle with dividing by 8 to see the total bit traffic instead of byte traffic. thank you.
2 votes -
Add Proton VPN to Meta Quest
Add Proton VPN to Meta Quest
2 votes -
OVPN Accelerator Script for Client Router Implementations
Your VPN accelerator is a feature of almost all implementations of your VPN except custom configurations for OVPN client routers.
And routers could perhaps more than any other device stand to benefit the most!
2 votes -
Unblock Roku Channel with Proton VPN
Unblock Roku Channel with Proton VPN
2 votes -
打开软件先连接一个节点 保证能登录
这里proton网站是被限制访问的
2 votes -
Add VPN auto connect and block if not connected features
I have been using NordVPN on my FireStick and hoped to replace it with ProtonVPN however it is missing a few essential feature to make it useable.
I want my VPN to immediately connect on Startup and remain connected all the time. ProtonVPN on FireStick does not have autoconnection settings and doesn't prevent connection until (and only when) a VPN connection is made.
It is also missing the options to specify my own DNS servers.
Manually connecting each time and loosing VPN connection unknowingly is not acceptable, these are the reasons we want to use a VPN.
Thanks!
2 votes -
Kill switch should stay on with split tunneling
I use Proton VPN at the router level, so my home Wi-Fi is already protected. On my laptop, I’d like to exclude my home network from the VPN using split tunneling without disabling the kill switch.
Right now, having both the router VPN and the laptop VPN running creates a double VPN, which slows down all internet traffic while I’m at home. If split tunneling worked with the kill switch enabled, I could use my home network normally without the slowdown, and when I leave home and connect to any other network, the kill switch would still protect me—no manual…
2 votes -
Clear all formatting in iOS app
Hello there,
Could you kindly add the option/alternative/function/button "Clear all formatting" in the iOS app's email editor? I use it all the time in the browser, and miss it on my phone. It's extremely helpful for clearing all formats from e.g., pasted text and more.
2 votes -
Auto Local server
For many day uses I want to connect to the server of the city I'm actually in to avoid second guesses from myself and other services. (Aka auto local mode.)
2 votes -
Request: Minimal “Connected” View for Android App
It would be helpful if the Proton VPN Android app offered an option to hide data (MB) usage while connected and instead showed only “Connected” with the selected VPN location in the background.
2 votes -
Desktop app should show an icon in the toolbar that shows open connection, connecting and disconnected
Right now when reconnecting to the VPN the icon shows a pad lock (green) or a open pad lock (red) when connecting to the VPN.
I would like to see it changed to show icons as:
- Green Locked pad lock (Only once connected and data is passing through)
- Gray Locked pad lock (Connecting to VPN)
- Red Open pad lock (Not connected to VPN)
2 votes -
2 votes
-
BPay for ProtonVPN subscription payments.
So far as I can see, it's not possible to pay for a new or existing ProtonVPN subscription via BPay. This is somewhat limiting/inconvenient for those of us who don't shop online, have credit cards, or otherwise prefer to have as few bank cards/accounts as we can reasonably get away with. BPay offers a secure and convenient means to pay for services without needing a seperate card that, in some cases, will never be used for anything but those payments (ranging from once a month to once every two years).
To my knowledge, there are no disadvantages nor other reasons…
2 votes -
Possibility to choose server with free account
My idea Is that who has a free Plan of ProtonVPN can choose the server between the free ones.
2 votes -
Change the Firefox extension icon based on the split tunneling status on the current domain
Currently, when the user has enabled split tunneling in the ProntonVPN extension for Firefox, the extension icon always remains green even on sites where the VPN is disabled. This can be confusing, especially if the user does not remember which sites they are using split tunneling on and which they are not. In my opinion, it would be much clearer if the icon showed a green padlock on sites where the VPN is active, and a red open padlock on sites where split tunneling disables the VPN.
This request applies both to normal split tunneling and to Inverse Split Tunneling…
2 votes -
"Disconnect" Button over hover profile in profile section
In the profile section, when connected to a particular profile, it should show the button of "Disconnect" button when hovering over that same profile again. Right now, it shows the connect button again, even if it is connected to that profile.
2 votes -
Access to DirecTV streaming
While connecting to a US server, it would be a nice addition to have access to the DirecTV streaming service.
As of now, there's no way to use it for that streaming service.
2 votes -
Enable custom VPN profiles & seamless multi‑VPN switching on Android (shared kill‑switch)
Android only permits one active VPN at a time, which forces me to disconnect Proton VPN whenever I need to use my work OpenVPN or my home WireGuard tunnel. Because the kill‑switch is tied to the active tunnel, I lose protection during each switch.
What I’d like:
- Import custom VPN configs (.ovpn / WireGuard .conf) directly in the Proton VPN app and save them as separate profiles.
- Profile orchestration: let the app switch between Proton, work, and home VPNs without manually closing the current tunnel first.
- Smart kill‑switch: keep the kill‑switch engaged during the transition, blocking traffic until the newly selected tunnel…
2 votes -
Allow a config file or something similar for use during automated installs during Windows Sandbox spinup.
Lots of folks use the Included Sandbox with the Windows Pro versions of 10 & 11. They allow scripts to be run to install apps, like Firefox and VPN's among many others during the OS spinup process.
Allowing the .launcher to have the login and password included would be a great feature or maybe a way to drop a file somewhere that had my configuration info in a place to have your launcher pre-populate those fields for launching the vpn app would be extremely helpful. Having to open my PW manager and copy and paste both the username and password…2 votes -
The ProtonVPN client works great; I wish I could get PVPN and pfSense working that well.
The PVPN client performance is stellar, but I seek similar performance for whole home protection by setting up PVPN in a pfSense VirtualBox VM on a separate laptop which doesn't do much else. I've used PVPN via that setup for years. Running speed tests on the same machine as where the pfSense/PVPN VM is running, I have found to be disastrous: incredibly low throughput, no matter what PC it's running on.
No VPN: 95Mbps. PVPN client: 85Mbps. PVPN+pfSense: 50Mbps (worst case). Those are download speeds given by OpenSpeedTest run from a different PC on the LAN than where the pfSense…
2 votes
- Don't see your idea?