Proton VPN
399 results found
-
Split tunneling - Exclude one specific URL only.
Split tunneling - Exclude one specific URL only.
On my local network, I have to use a browser to access the settings for my Ethernet box. I could exclude the browser. However, I would prefer to exclude only the Ethernet box URL and be protected for other URLs.
Note: I haven't found a solution to this problem. My “Allow LAN connections” setting is enabled. It doesn't allow access to the Ethernet box, probably because of the browser session, I guess.
Thanks3 votes -
Microsoft Edge for Android Extension
Microsoft Edge on Android now supports browser extensions, yet the number of available VPN extensions is extremely limited. At the moment, only a few providers such as AdGuard, Browsec, and NordVPN are present in the Edge Add-ons store.
Although ProtonVPN already offers an Android application, it establishes a system-wide VPN connection. Many users would prefer a browser-only VPN option that routes traffic only from the browser without affecting the entire operating system. A ProtonVPN extension for Microsoft Edge on Android would address this need, offering a lightweight, flexible, and privacy-focused browsing solution while expanding ProtonVPN’s presence on mobile platforms.3 votes -
Adult content filtering
Adding adult content filtering option for NetShield feature would be most welcoming for families or people trying to be free of its negative effects for themselves.
I have to use custom DNS option from outside of Proton VPN which can be risky for privacy concerns.
Filtering out industry that too often is predatory, capitalizing on peoples loneliness or people in desperate situations is a net positive in my opinion for everybody involved.
3 votes -
1.IP Rotator: Troca seu endereço IP automaticamente a cada 5 a 10 minutos, dificultando ainda mais o rastreamento. Enviado via Proton Mail p
1.IP Rotator: Troca seu endereço IP automaticamente a cada 5 a 10 minutos, dificultando ainda mais o rastreamento.
Enviado via Proton Mail para Android2.GPS Spoofing: Recurso exclusivo para Android que simula a sua localização GPS, fazendo com que aplicativos pensem que você está no mesmo local do servidor VPN.
3.Servidores Obfuscated: Servidores especiais que disfarçam o uso da VPN, permitindo que você contorne firewalls em locais com censura.
4.Meshnet: Cria uma rede privada e criptografada para conectar seus dispositivos, permitindo que você acesse arquivos remotamente e jogue com amigos em uma rede LAN virtual.
ENTÃO ESSES QUATRO RECURSOS AÍ…3 votes -
Please allow Split Tunneling setting for each profile separately
I am a total noobie in Proton VPN but after experimenting awhile, I was not able to set Split Tunneling settings for each profile separately but only universally for the whole application. If this not only my inability to use th app correctly but a existing limitation, please make it possible.
3 votes -
Add Proton VPN to Meta Quest
Add Proton VPN to Meta Quest
3 votes -
Add VPN auto connect and block if not connected features
I have been using NordVPN on my FireStick and hoped to replace it with ProtonVPN however it is missing a few essential feature to make it useable.
I want my VPN to immediately connect on Startup and remain connected all the time. ProtonVPN on FireStick does not have autoconnection settings and doesn't prevent connection until (and only when) a VPN connection is made.
It is also missing the options to specify my own DNS servers.
Manually connecting each time and loosing VPN connection unknowingly is not acceptable, these are the reasons we want to use a VPN.
Thanks!
3 votes -
Developing a VPN Protocol like Nordlynx
Hey,
I know that NordVPN uses its own VPN protocol based on Wireguard (called NordLynx), giving the possibility to get more privacy and faster internet speeds, since they can tweak the protocol however they want. So why not do the same with ProtonVPN? The new protocol could be named ProtonVortex, emphasizing the faster speeds but still secure environment this protocol would allow.3 votes -
Add disconnect on a timer
Sometimes you want to turn off the VPN to be able to deal with a site that blocks them, but you want to turn it right back on after. NordVPN has a feature where you can disconnect on a timer, like 5, 10 minutes etc after which is automatically re-connects.
3 votes -
3 votes
-
Inverse Split Tunneling for Firefox extension
Currently, Split Tunneling in the ProtonVPN extension for Firefox allows excluding certain sites from using the VPN. It's ok. However, in certain circumstances, the opposite may be preferable: enabling ProtonVPN only for certain critical sites and leaving all other sites to browse without it.
3 votes -
Proton VPN Statistics on Logged-in Account Page
Hi,
I use Proton VPN on a router with WireGuard configuration and the generated config.
Since the Proton VPN apps provide statistics for:
- Server Load
- Total Traffic
- Traffic Graph
- Other?
And since my router doesn't provide any statistics on the VPN connection status, it would be nice to have these statistics on the Account web page.Would that be possible?
Thanks and regards3 votes -
3 votes
-
Proton VPN Windows client prevents LAN access. Help!
When the Proton VPN Windows client is connected to the VPN, I am unable to access other PCs on the LAN. If PVPN is disconnected, then the PCs are accessible. The setting in the client to allow LAN access is enabled. The PCs on the LAN all have static IP addresses, as do all the networking devices. So, how can LAN resources be made available when PVPN is connected?
3 votes -
Toggle option to exclude Smart Routing servers in settings
For all ProtonVPN clients, there should be a toggle option in Settings that allows you to exclude Smart Routing servers from your connection. Something like:
"Exclude Smart Routing servers (use only servers physically located in your selected country)"
When you set up your Default Connection to be in your own country, you may be connected to Smart Routing servers which are physically located in another one and therefore will have worse latency.
For example:
A user in Argentina sets their Default Connection to "Argentina" for minimal latency. Without excluding Smart Routing servers, they might connect to a server physically in…
3 votes -
new feature to test all servers in a country for speed and latency and get the result as list
(1) Please offer a feature to test all servers in a specific country for speed and latency and get the result as a list to chose the best server for use in other apps or as server on the router which doesn't have quick connect.
(2) Similar feature to find the best available, reachable server for countries with censorship which blocks VPN.3 votes -
Add channel bonding like Speedify offers
Add channel bonding like Speedify offers - it's literally the only feature I care about.
3 votes -
iOS, pin my custom profiles and show the name
Create a profile, be able to pin it, and see the name that you named it. Right now the name is useless.
3 votes -
Maintain 'Open' or 'Moderate' NAT Type While Port Forwarding for Enhanced Multiplayer Gaming Experience"
Why does enabling port forwarding change the NAT type from "Moderate" to "Strict"? It should either be "Open" or remain "Moderate." This distinction is crucial for many online P2P multiplayer games, such as GTA Online & many more, where a "Strict" NAT type severely hampers multiplayer functionality.
I hope that in the future, Proton VPN can address this issue, allowing users to achieve an "Open" or "Moderate" NAT type while port forwarding is enabled.
I hope this concern is taken seriously. Thank you.
3 votes -
make it possible to use on a Macbook Pro with a Brave and/or Safari browser
I have been having increasing difficulties accessing websites with my Proton VPN turned on -- I updated the Brave browser this morning and suddenly I am denied access to nearly every website unless I turn off Proton VPN, which pretty much makes it useless.
3 votes
- Don't see your idea?